System Requirements
  • • Available USB-C® or USB™ Type-A port
  • • Windows® 11 / 10
    macOS® 10.10 or later
    Chrome OS™

Special Notes
  • • Display may vary depending on environment. Solid and nonporous materials such as steel, concrete, brick and glass (varies depending on coating and thickness) may cause shorter viewing distance or loss of signal.
  • • Priority of Audio-Output on the ports of TX would be “3.5mm Speaker→ USB™ Speaker/microphone → USB™ camera with speaker/microphone”
  • • TX and RX devices will connect and pair each other automatically. If devices are properly be paired and USB™ camera has been connect with TX, then camera will be activated automatically

Hardware

Warranty

2 Year Limited

Host Connector

RX│Receiver:
USB-C® or USB® Type-A port

Power Source

TX Transmitter:
1 - DC 5V/3A Power Adapter
RX│Receiver:
1 - Bus Power through USB-C®

LED Indicator

TX│Transmitter / RX│Receiver:

  • • Red: Power on
  • • Orange: Waiting to connect *TX and RX are connected, but the USB™ camera or USB™ Speaker/Microphone are not connect to TX USB™ port
  • • Orange flashing light: TX / RX pairing
  • • Green: TX / RX connected, and TX USB™ camera is enabled.

Pair Button

Pair Button
If TX are RX devices are close together but, the TX and RX device’s LEDs are red and or if they disconnect, please try turning on “pairing mode”. To turn on paring mode find the Pair button located on the bottom side of TX and RX device, push and hold the TX and RX device’s pairing button 5 seconds, the power LED will change orange and will blink for 1 minute. If TX and RX device are paired, the LED will turn green and will stop blinking.

Audio ON/OFF Switch

RX│Receiver:
Located on the RX device’s bottom side, the "Audio ON/OFF switch" quickly enables or disables audio
- Switch to ON: enables audio
- Switch to OFF: disables

Ports

TX│Transmitter:1 - USB-C® Power In
1 - USB™ Type-A Female (Camera)
1 - USB™ Type-A female (Speaker/Microphone)
1 - 3.5 mm Speaker Out

IR

N/A
Performance

Audio Channel

2.1 CH stereo

Display Output Supported Resolutions

H.264:2160p / 1080p / 720p / 480p / 240p @ 30 FPS
1080p @ 60 FPS
MJPEG:1080p / 720p / 480p / 240p @ 30 FPS
YUV:1080p / 720p / 480p / 240p

RF Output Power

+15 dBm ±1 dBm

Security (Encryption)

128/256-bit AES based encryption
WPA2 authentication protocol

IR Return Frequency

N/A

ESD Protection

N/A

OVP Protection

N/A
Wireless Protocols

Standard

IEEE 802.11ac

Frequency

5 GHz Band I, Band IV, CE Only Band I

Range

Up to 82 ft. (25 m)

Channel Width

80 MHz

Antenna Type

Transmitter (TX): External antenna x 2
Receiver (RX): Built-in antenna
Physical Specifications

Color

Black

Enclosure Type

Plastic

Cable Length

Receiver (RX): 6.5 in. (16.5 cm)

Product Height

Transmitter (TX): 0.9 in. (23 mm)
Receiver (RX): 0.83 in. (21 mm)

Product Width

Transmitter (TX): 3.74 in. (95 mm)
Receiver (RX): 2.63 in. (67 mm)

Product Depth

Transmitter (TX): 3.74 in. (95 mm)
Receiver (RX): 2.63 in. (67 mm)

Product Weight

Transmitter (TX): 3.95 oz (112 g)
Receiver (RX): 1.95 oz (55.5 g)

Operating Temperature

+32 to +104°F (0 to +40°C)

Operating Humidity

< 85% non-condensing

Storage Temperature

-4 to +122°F (-20 to +50°C)

Storage Humidity

< 85% non-condensing

Package Contents

  • • 1 - JVW120 Wireless Extender for USB™ Cameras / Microphones / Speakers set (1 x Transmitter & 1 x Receiver)
  • • 1 - DC 5V/3A Power Adapter
  • • 1 - Hook and loop fastener
  • • 1 - Quick Installation Guide (QIG)